WILL AIE-71
Eco Soluble Cutting Fluids of Taiwan-Japanese Technical Production Cooperation
Model No.：(50G) CL-4-A01；(5G) CL-4-B01
Chlorine-Free Soluble Cutting Fluid, All-purpose Water Soluble Cutting Fluid, Emulsion Cutting Fluid, Cutting Oil, Metalworking Fluid, Metal Processing Oil
WILL AIE-71 cutting fluid has the excellent cooling, washing abilities and good rust protection.
.jpg?v=cbe17ff0)
WILL AIE-71 Water-Soluble Cutting Fluid
Introduction
WILL series is one of the trademark for HAI LU JYA HE’s industrial lubricants line. WILL AIE-71 water-soluble cutting fluid forms a milky emulsion with water and contains rust corrosion inhibitor and Biocide to prevent bacterial growth in emulsion systems. WILL AIE-71 has superior Cooling and Lubricating properties, which minimize tool wear. It's worth noting that WILL AIE-71 used eco-friendly formula without chlorine additive, and use vegetable oils as oil-based. Besides, WILL AIE-71 cutting fluid has excellent hard water stability that effective prevent for oil and water separates.
Application
Recommended for a variety of cutting operations on ferrous and nonferrous metals, especially for aluminum and steel alloys which has excellent aluminum compatibility. It is used for lathe, boring, milling, drilling, tapping, threading, reaming, sawing operations. It is recommended to use 3 – 5% concentrations for all types of operations. Therefore, WILL AIE-71 cutting fluid is also called all-purpose water-soluble cutting fluid.
Features and Benefits
- Excellent antifoaming performance：No foaming problem, even if it is used under the condition with high-pressure pump.
- Excellent anti-corrosion effect to Non-ferrous metal, especially aluminum alloys
- Excellent lubricity：Wonderful finish of the product and the extension of service life of the tools.
- Excellent hard water stability：Provides long coolant life without emulsion break problem caused by metal-ion.
- Non chlorine, PRTR free：An environmentally friendly coolant: chlorine extreme pressure additive is not added.
Typical Properties
Appearance | Brown |
Density [g/cm3 15℃] | 0.94 |
Kinetic viscosity[mm2/s 40℃ | 76 |
Appearance Diluted. (5%) | White emulsion |
pH (5%) 1:20 dilution | 8.9 |
Health and Safety
Safety Data Sheet protect health and security and also a duty to properly label substances on the basis of physio-chemical, health or environmental risk. Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed.
Packaging
- Pail：18 Liters / 5 Gallons
- Barrel：200 Liters / 50 Gallons
Storage
- Storage：Avoid direct sunlight, under normal temperature, keep in dry and cool place
- Expiration date：6 months (Base on brand-new)
- Substances floating on the coolant may be seen in the beginning of use. They are antifoaming additive and disappear in a couple of days
SDS, TDS, Reach and RoHs are available upon request through Files Download button. If you can leave more information to let us know your demand, we'll thankful. Or you can click "Send Inquiry" and "Contact Us" buttons to let us know more information.
- Files Download
Technical Data Sheet (TDS) of WILL AIE-71
A Technical Data Sheet is a document which describes the technical data of a raw material. It has been approved before any tests of the material ,and contain any information that is important for our use of the material in the intended application.
-
Safety Data Sheet (SDS) of WILL AIE-71
Protect health and security and also a duty to properly label substances on the basis of physio-chemical, health or environmental risk.
-
REACH of WILL AIE-71
Reach is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals.
-
RoHS of WILL AIE-71
RoHS (Reduction of Hazardous Substances) is a piece of legislation created by the EU to reduce the harmful effects of dangerous substances to people and the environment. This is because all EU products have to conform to the European standards.
-
Warranty of non-use chemical substances (WILL AIE-71)
The certification of non use warranty for chemical substances.
- Related Products
- Application
Coolant For Aluminum
Emphasis On Surface Brightness Of Work Pieces
Aluminum alloy is silvery-white, soft, non-magnetic, highly reactive and ductile metal which is remarkable for its low density and its ability to resist corrosion through the phenomenon of passivation. And aluminum alloys are commonly used in metal processing industry, especially for high-speed machining.
Coolant For Steel
Suitable for high speed and heavy operations, especially hard materials.
Hai Lu Jya He Enterprise has designed eco-friendly coolant to be suitable for steel materials. There are two types, water soluble cutting fluid (emulsion coolant, semi-synthetic coolant and synthetic coolant) and neat cutting oil.
- Article
- All-purpose cutting oil is commonly used for each machining that it can suitable for various metal materials. But is it enough? As we know, there are many sort of cutting fluids in the market. So how to choose the right cutting oil? At first, metal and machining operations which you need to gather some basic information relevant to the selection criteria.... Read MoreMetalworking fluids(MWFs), mainly used as 2–10% emulsions in water which are among the commonest chemical exposures. Most MWFs are mixtures of base oil and auxiliary substances such as emulsifiers, antimicrobial agents, corrosion inhibitors, extreme pressure additives, etc. which are strongly alkaline, and contact with skin can remove natural oils and damage the proteins in the skin's protective outer layer so that skin's water content is diminished, and the result is dry, scaly, inflamed skin.... Read More
Press Release
IoT Coolant Monitoring SystemMaintaining proper coolant concentration levels for machine tools extends cutting tool life and cutting oil life ,and helps ensure quality workpiece surface finishes.
Read More
MORESCO GR-5 Synthetic FluidsHigh lubricity ensures quality grinding by removal of fine particles, resulting in a regular and clean surface which is recommended for glass. GR-5 synthetic fluids that formulate without...
Read More
Wastewater Treatment MachineUF membrane excels at the clarification of solutions containing suspended solids, bacteria and high concentrations of macromolecules, including oil and water.
Read More